These are new products and are in limited supply because I only have one prototype mold with one cavity for each of the four radii, 3″, 6″, 9″, and 12″. It started out as a pet project for the polymer strops but once I had the mold I figured I should make some stones too. The stones are not dressed and are going to be a pain to dress, so make sure you understand this before purchasing. They are all the same thickness as the Matrix stones, .25″, and have the same mount, just different engraving. I am looking for feedback and suggestions for improvements, so please don’t hold back if so inclined.
Below you can see what the radius looks like with 12″ on the left, 9″, 6″, and 3″ on the right. The 3″ radius stones will have a limited life due to how thin they are at the sides and should be thicker, but for now this is the mold I have. Due to this, I have reduced the price accordingly. To help decide what radius you need for your knife find a bottle of the right diameter and hold your knife to it at the angle you sharpen at. A 5 gallon bucket is a 6″ radius near the top.
Reviews
There are no reviews yet.